Back to Benchmark
System Brightness Max Verify
Goal: Turn brightness to the max value.
Plan Input
Input:
user:
Goal: Turn brightness to the max value.
user: None
Task Thinking
Step 1Thoughts:
The current subgoal requires a `swipe` action. The target is "from the top edge", which means the starting coordinate should be at the top of the screen. To open Quick Settings, a downward swipe is needed. I will choose a starting coordinate near the top center and an ending coordinate further down the screen.
Code:
swipe(coordinate=[540, 100]coordinate2=[540, 1000])
Task Execution Result
Output:
Swipe down from the top edge of the screen to open Quick Settings.
Task End
Success Reason:
Swipe down from the top edge of the screen to open Quick Settings.
Success
Task Thinking
Step 2Thoughts:
The current subgoal explicitly states to "Swipe down from the top again". This translates to a `swipe` action. The starting coordinate should be near the top of the screen, and the ending coordinate should be further down to perform a downward swipe. I will use `[540, 100]` as the start and `[540, 1000]` as the end.
Code:
swipe(coordinate=[540, 100]coordinate2=[540, 1000])
Task Execution Result
Output:
Swipe down from the top of the screen to fully expand Quick Settings.
Task End
Success Reason:
Swipe down from the top of the screen to fully expand Quick Settings.
Success
Task Thinking
Step 3Thoughts:
The current subgoal is to drag the "Display brightness" slider all the way to the right. I need to identify the slider element and then perform a swipe action from its left side to its right side. The UI element list shows a SeekBar with the text "Display brightness" at index 4, with bounds (42, 357, 1038, 483). I will choose a starting coordinate on the left side of the slider and an ending coordinate on the right side of the slider, within its y-bounds, to simulate dragging it to the max.
Code:
swipe(coordinate=[100, 420]coordinate2=[980, 420])
Task Execution Result
Output:
Swipe the "Display brightness" slider from left to right to set it to maximum.
Task End
Success Reason:
Swipe the "Display brightness" slider from left to right to set it to maximum.
Success
Plan Thinking
Thoughts:
Brightness has been set to the maximum level using the Quick Settings slider.
Code:
complete_goal(message="Brightness has been set to the maximum level using the Quick Settings slider.")
GIF not available
Plan Input
Input:
user:
Goal: Turn brightness to the max value.
user: None
Task Thinking
Step 1Thoughts:
The current subgoal requires a `swipe` action. The target is "from the top edge", which means the starting coordinate should be at the top of the screen. To open Quick Settings, a downward swipe is needed. I will choose a starting coordinate near the top center and an ending coordinate further down the screen.
Code:
swipe(coordinate=[540, 100]coordinate2=[540, 1000])
Task Execution Result
Output:
Swipe down from the top edge of the screen to open Quick Settings.
Task End
Success Reason:
Swipe down from the top edge of the screen to open Quick Settings.
Success
Task Thinking
Step 2Thoughts:
The current subgoal explicitly states to "Swipe down from the top again". This translates to a `swipe` action. The starting coordinate should be near the top of the screen, and the ending coordinate should be further down to perform a downward swipe. I will use `[540, 100]` as the start and `[540, 1000]` as the end.
Code:
swipe(coordinate=[540, 100]coordinate2=[540, 1000])
Task Execution Result
Output:
Swipe down from the top of the screen to fully expand Quick Settings.
Task End
Success Reason:
Swipe down from the top of the screen to fully expand Quick Settings.
Success
Task Thinking
Step 3Thoughts:
The current subgoal is to drag the "Display brightness" slider all the way to the right. I need to identify the slider element and then perform a swipe action from its left side to its right side. The UI element list shows a SeekBar with the text "Display brightness" at index 4, with bounds (42, 357, 1038, 483). I will choose a starting coordinate on the left side of the slider and an ending coordinate on the right side of the slider, within its y-bounds, to simulate dragging it to the max.
Code:
swipe(coordinate=[100, 420]coordinate2=[980, 420])
Task Execution Result
Output:
Swipe the "Display brightness" slider from left to right to set it to maximum.
Task End
Success Reason:
Swipe the "Display brightness" slider from left to right to set it to maximum.
Success
Plan Thinking
Thoughts:
Brightness has been set to the maximum level using the Quick Settings slider.
Code:
complete_goal(message="Brightness has been set to the maximum level using the Quick Settings slider.")