Expense Delete Duplicates2

The current subgoal is to "Open the Pro Expense app." The atomic action required is `open_app`. The target app name is "Pro Expense".

open_app(text="Pro Expense")

The current subgoal is to open the navigation drawer by clicking the "hamburger button". Based on the UI elements, element 5 is an "ImageButton" located at the top left, which typically represents a hamburger menu. I will click this element.

click(index=5)

The current subgoal is to "Tap Expense Logs from the navigation drawer to open the full list." I need to find the element with the text "Expense Logs" in the provided UI elements and perform a click action on it. Element 12, a CheckedTextView, has the text "Expense Logs".

click(index=12)

The current subgoal explicitly states to "Tap Filter". I will locate the "Filter" element in the provided UI elements and perform a click action on it. Element 8, "TextView: com.arduia.expense:id/filter", "Filter", is the correct target.

click(index=8)

The current subgoal is to "Tap the From date card". The UI element corresponding to the "From" date card is `CardView: "com.arduia.expense:id/cv_start_date", "cv_start_date" - (220, 1610, 430, 1839)`, which has index 7. Therefore, the required action is a click on index 7.

click(index=7)

The current subgoal is to "swipe horizontally through months until January 2023 is shown". The current screen shows "October 2023". To go to January 2023, I need to swipe left. The swipeable element is `day_picker_view_pager` (index 5). I will perform a single swipe action from right to left within this element.

swipe(coordinate=[700, 1280]coordinate2=[300, 1280])

The current subgoal is to "Swipe right on the month view to go to previous months until Jan 2023 appears." The atomic action required is `swipe`. The target is the "month view". The coordinates for the month view are `(162, 836, 918, 1724)`. To swipe right, I need to specify a starting coordinate on the left and an ending coordinate on the right within the month view. I will use `[300, 1280]` as the starting point and `[700, 1280]` as the ending point.

swipe(coordinate=[300, 1280]coordinate2=[700, 1280])

The current subgoal is to swipe left across the month grid repeatedly until January 2023 appears. The current month displayed is October 2023. To go to a previous month, I need to swipe left. I will use the `swipe` action with coordinates that represent a leftward swipe within the month view.

swipe(coordinate=[700, 1280]coordinate2=[300, 1280])

The current subgoal asks to swipe across the month header/grid again to move to previous months. This means performing a swipe action from right to left on the month view. I will use the coordinates [700, 1280] as the starting point and [300, 1280] as the ending point for the swipe, which are within the bounds of the month view (element 6).

swipe(coordinate=[700, 1280]coordinate2=[300, 1280])

The current subgoal is to "Tap the header year “2023” to open the year selector." I need to find the clickable element that corresponds to "2023" and perform a click action on it. Based on the provided UI elements, element 2 is "TextView: "android:id/date_picker_header_year", "2023"". This is the correct element.

click(index=2)

The subgoal is to "Tap the “2023” item to return to the month/day calendar." Based on the device state, there are two "2023" elements. The previous action was to tap the header year "2023" (index 2) to open the year selector. Now, to return to the month/day calendar, I need to tap the "2023" that is currently selected in the year picker list. This corresponds to element with index 6: `6. TextView: "android:id/text1", "2023" - (162, 836, 918, 991)`.

click(index=6)

The current subgoal is to swipe right on the month calendar to go to previous months until January 2023 is shown. The current month is October 2023. To go to previous months, I need to perform a swipe right action on the calendar view. The calendar view is element 6, "month_view". I will use coordinates within this view for the swipe.

swipe(coordinate=[300, 1280]coordinate2=[700, 1280])

The current subgoal is to swipe left-to-right across the month grid area (ViewPager) to move to earlier months. The previous action was a swipe right, which is consistent with moving to earlier months (e.g., from October to September). I need to repeat this action until January 2023 appears. The ViewPager element is `5. ViewPager: "android:id/day_picker_view_pager", "day_picker_view_pager" - (162, 836, 918, 1724)`. I will use coordinates within this range for the swipe. A swipe from left to right would be `coordinate`: [300, 1280] and `coordinate2`: [700, 1280].

swipe(coordinate=[300, 1280]coordinate2=[700, 1280])

The current subgoal is to "Swipe up on the calendar grid area to move to earlier months". The calendar grid area is identified by `ViewPager: "android:id/day_picker_view_pager"`, which has bounds `(162, 836, 918, 1724)`. To swipe up, I will choose a start coordinate in the lower part of this view and an end coordinate in the upper part.

swipe(coordinate=[500, 1400]coordinate2=[500, 1000])

The current subgoal explicitly states to "Tap OK on the From date picker to confirm Oct 1, 2023." I need to locate the "OK" button in the provided UI elements and perform a click action on it. Element 40 is identified as the "OK" button.

click(index=40)

The subgoal explicitly states to "Tap the To date card". Based on the provided UI elements, the "To date card" is identified as `CardView: "com.arduia.expense:id/cv_end_date"` with index 11. Therefore, the required atomic action is a `click` on element 11.

click(index=11)

The current subgoal requires two actions: first, tap the element with the text "31", and then tap the element with the text "OK". Based on the provided UI elements: - "31" corresponds to index 37. - "OK" corresponds to index 40. I will perform the first action, which is tapping "31".

click(index=37)

The subgoal explicitly states to "Tap OK in the To date picker". I need to find the "OK" button in the provided UI elements and perform a click action on it. Based on the UI elements, the "OK" button is element 40.

click(index=40)

The current subgoal is to "Tap the To date card to open the date picker." I need to find the UI element corresponding to the "To date card" and perform a click action on it. Based on the provided UI elements, `11. CardView: "com.arduia.expense:id/cv_end_date"` is the "To date card".

click(index=11)

The current subgoal is to "Tap day 31 in the To date picker." I need to find the UI element with the text "31" and click it. Based on the provided UI elements, element 37 has the text "31".

click(index=37)

The current subgoal is to "Tap OK on the To date picker to confirm the current To date (Oct 15)." I need to find the "OK" button in the provided clickable UI elements and perform a click action on it. Element 40 is "OK".

click(index=40)

The subgoal explicitly states to "Tap APPLY FILTER". I need to locate the UI element with the text "APPLY FILTER" and perform a click action on it. Based on the provided UI elements, element 19 is "Button: "com.arduia.expense:id/btn_apply_filter", "APPLY FILTER"".

click(index=19)

The current subgoal is to "Scroll down the Expense Logs". This directly translates to a `swipe` action. The target is the "Expense Logs" list, which is represented by the `RecyclerView` with `resourceId` `com.arduia.expense:id/rv_expense` (index 9). To scroll down, I need to swipe from a lower y-coordinate to a higher y-coordinate within the bounds of this RecyclerView. I will use the coordinates of the RecyclerView to determine the start and end points for the swipe. The RecyclerView bounds are (0, 275, 1080, 2337). I will swipe from approximately the bottom 80% to the top 20% of the RecyclerView.

swipe(coordinate=[540, 1800]coordinate2=[540, 500])

The current subgoal is to "Scroll down to view all entries through Oct 1." The current view shows entries up to "2023 Oct 9". To see entries through Oct 1, I need to scroll down further. The appropriate atomic action is `swipe`. I will use the same swipe coordinates as the previous successful swipe to continue scrolling down the list.

swipe(coordinate=[540, 1800]coordinate2=[540, 500])

The current subgoal is to scroll down to see more entries. The last visible entry is from "2023 Oct 6". To see entries through Oct 1, I need to scroll further down. The appropriate atomic action is `swipe`. I will use the same coordinates as the previous successful scroll actions.

swipe(coordinate=[540, 1800]coordinate2=[540, 500])

The current subgoal is to scroll down to reach older entries. The previous actions were also scrolling down, and the current screen shows entries up to "2023 Oct 5". To continue scrolling down, I need to perform another `swipe` action. I will use the same coordinates as the previous successful swipe actions to scroll down.

swipe(coordinate=[540, 1800]coordinate2=[540, 500])

The current subgoal is to scroll down to view the rest of the entries until Oct 1. The current view shows entries up to "2023 Oct 2". Therefore, I need to perform another scroll down action. The action is `swipe`. I will use coordinates that represent a scroll from the bottom part of the screen to the upper part to scroll down the list.

swipe(coordinate=[540, 1800]coordinate2=[540, 500])

The current subgoal explicitly states to "Scroll down once more". This translates directly to a `swipe` action. I will use the same swipe coordinates as the previous successful scroll down actions to continue scrolling.

swipe(coordinate=[540, 1800]coordinate2=[540, 500])

The current subgoal is to scroll up to the top of the list. This requires a `swipe` action. I will swipe from the bottom of the screen towards the top to reveal earlier entries.

swipe(coordinate=[540, 1800]coordinate2=[540, 500])

The current subgoal is to "Scroll up to reach the top of the list". This requires a `swipe` action. The previous actions were also swipes, but in the opposite direction (scrolling down). To scroll up, I need to swipe from a lower y-coordinate to a higher y-coordinate. I will use the coordinates [540, 1800] as the start point and [540, 500] as the end point to scroll up.

swipe(coordinate=[540, 1800]coordinate2=[540, 500])

The current subgoal is to "Scroll up to reach the very top of the Expense Logs (Oct 16 and nearby dates)." The previous actions were also scrolling up. I need to perform another swipe up action to continue scrolling towards the top of the list. I will use the same swipe coordinates as the previous successful actions for scrolling up.

swipe(coordinate=[540, 1800]coordinate2=[540, 500])

The current subgoal is to "Scroll up to reach the top of the Expense Logs". This requires a `swipe` action. The previous actions were also successful `swipe` actions in the "scroll up" direction. I will use the same coordinates as before to continue scrolling up.

swipe(coordinate=[540, 1800]coordinate2=[540, 500])

The current subgoal is to "Scroll up to reach the very top of the Expense Logs". This requires a `swipe` action. The previous actions were also `swipe` up, so I will repeat the same swipe action to continue scrolling up.

swipe(coordinate=[540, 1800]coordinate2=[540, 500])

The current subgoal is to scroll up to reach the very top of the Expense Logs. The previous actions were also scrolling up. Since the current view shows entries from Oct 3 and the header indicates entries up to Oct 16, it's likely there are still more recent entries to be revealed by scrolling up. I will perform another swipe up action to continue reaching the top of the list.

swipe(coordinate=[540, 1800]coordinate2=[540, 500])

The current subgoal explicitly states to perform a swipe-down gesture on the expense list, dragging from around y=500 to y=1800. This translates directly to a `swipe` action. The starting coordinate will be `[540, 500]` (mid-screen x, y=500) and the ending coordinate will be `[540, 1800]` (mid-screen x, y=1800).

swipe(coordinate=[540, 500]coordinate2=[540, 1800])

The current subgoal explicitly states "Swipe down again to bring Oct 6 and newer (up to Oct 16) into view." This requires a `swipe` action. To "swipe down" in a list, the starting y-coordinate should be lower than the ending y-coordinate, effectively pulling the list content upwards to reveal earlier dates (which are at the top of the list in this app, as indicated by "2023 Oct 1 - 16 . DESC"). I will use a swipe from the bottom of the screen to a point higher up to achieve this.

swipe(coordinate=[540, 1800]coordinate2=[540, 500])

The current subgoal explicitly states to "Swipe down again". This translates to a `swipe` action. To swipe down, the starting y-coordinate should be smaller than the ending y-coordinate. I will use the middle of the screen for x-coordinates and choose y-coordinates that are within the scrollable area of the `RecyclerView` (index 9). A good starting point would be around the middle of the screen, and the end point towards the bottom.

swipe(coordinate=[540, 500]coordinate2=[540, 1800])

The current subgoal is to "Scroll to the very top of Expense Logs to view Oct 16–Oct 7 entries". The current view shows entries from Oct 5 downwards. To see entries from Oct 16 to Oct 7, which are more recent, I need to scroll up the list. This means performing a swipe action from the bottom of the scrollable area to the top.

swipe(coordinate=[540, 1800]coordinate2=[540, 500])

The current subgoal explicitly states "Swipe down to reach the top of the list (Oct 6 and any entries up to Oct 16)." The action required is "swipe". The direction is "down". A "swipe down" gesture typically means moving the finger from a higher point on the screen to a lower point (e.g., from y1 to y2 where y1 < y2). To perform a swipe down gesture within the scrollable area (RecyclerView: 0, 275, 1080, 2337), I will choose a starting coordinate like [540, 500] and an ending coordinate like [540, 1800].

swipe(coordinate=[540, 500]coordinate2=[540, 1800])

The current subgoal is "Swipe down again to reach the very top of the list and confirm the first entry (likely Oct 6 “Car Maintenance”)." To reach the "very top of the list" and see entries like "Oct 6", which are more recent than the currently visible "Oct 5", I need to scroll *up* the list. Scrolling up the list means the content on the screen moves *down*. To make the content move down, I need to perform a swipe gesture from the bottom of the screen towards the top. Therefore, the `coordinate` (start point) should have a higher y-value than `coordinate2` (end point). A suitable swipe action would be `swipe(coordinate=[540, 1800], coordinate2=[540, 500])`.

swipe(coordinate=[540, 1800]coordinate2=[540, 500])

I checked all expenses available in Pro Expense for 2023 Oct 1–16 and found no exact duplicate entries. Because there were no duplicates, no deletions were made, and one instance of each unique expense remains intact.

complete_goal(message="I checked all expenses available in Pro Expense for 2023 Oct 1–16 and found no exact duplicate entries. Because there were no duplicates, no deletions were made, and one instance of each unique expense remains intact.")